Thursday, January 23, 2014

More PJ Eaters- With Tutorial Tips

After my first PJ eater, I was hooked. Not only was it a big hit with the birthday boy, but it was also really simple!
Here are a couple more I have made for Birthday presents.

If you remember, I altered the body of the pattern so that I could insert a cushion insert, this allows for easier washing, and also that the insert can be replaced if ever needed.

I did keep the hand and feet pattern the same, but I wanted to offer you some tips on how I sew it together, as I have heard of a couple of people having trouble getting the curved sole to fit in the leg part.
This not only works for these feet but any curve and straight edge combination.

1) Line up the straight edge on the curved piece, where you would like the seam, then move it over 1cm more.

2) Start sewing from where you originally wanted the seam, as we will need that extra 1cm to actually create the seam.
Make sure the curved piece is the piece you have positioned on top while you are at the machine.

3) slowly sew around the edge, moving just the curved piece as you go, making sure the edges still line up.

4) Sew right up to where you started and finish off.

5) When you now look at the straight piece, it may not line up completely on what will be our seam edge- but just imagine sewing that first and trying to make the curve piece not fit, as it often makes the straight piece too big and requires a lot of pinning, adjusting and frustration.

6) Matching up the side edges so they are straight- but not necessarily meeting, sew from your last finished point straight down the edge.

And you're DONE!
It's that SIMPLE!

1 comment:

elliesue said...

Thank you for this tutorial, they are the only way I can fathom some instructions out.